Phone: 321-872-7280 | Fax: 321-282-7630 | E-mail: info@aerodefenselogistics.com

Aero Defense LogisticsSupplier of Military Spare Parts and Supplies for the U.S Government

5915-01-296-2200


FSC  NIIN  NAME 
 5915   012962200   FILTER,BAND PASS 

Request for Quote

Identification

PMIC  ADPE
CODE 
CRITL
CODE 
DEMIL
CODE 
DEMIL
INTG 
NIIN
ASGMT 
ESD  HMIC  ENAC  SCHEDULE B  INC 
 A      X   Q   3   17-MAR-89      P      8527995030   00209 

5915-01-296-2200 Master Cross Reference Data

Mfr. Part Number Cage - Company Name ISC RNVC RNCC HCC MSDS SADC DA
 20-0759-00  11402 - HISONIC, INC.  5  2  5        5 
 314-0005-010  13499 - ROCKWELL COLLINS, INC.  5  2  3        A 

5915-01-296-2200 Technical Characteristics

MRC Requirements Statement Reply
ABKWOVERALL HEIGHT1.265 INCHES MINIMUM
ADAQBODY LENGTH2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM
ADATBODY WIDTH1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
ADAUBODY HEIGHT0.875 INCHES MAXIMUM
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.692 INCHES MINIMUM AND 2.708 INCHES MAXIMUM
AECRVIBRATION RESISTANCE RANGE IN HERTZ+5.0/+2000.0
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.192 INCHES MINIMUM AND 1.208 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-54.0/+105.0 DEG CELSIUS
AHAJREFERENCE FREQUENCY PER FUNCTION37.0 KILOHERTZ BLANK
AHAQSOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS BLANK
AHASLOAD IMPEDANCE PER FUNCTION330.0 KILOHMS BLANK
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE BLANK
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS3.0 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 PIN GROUND 3RD FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY2 PIN INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY2 PIN OUTPUT 2ND FUNCTION
CQDZMAXIMUM DIELECTRIC WITHSTANDING AC RMS VOLTAGE100.0 VOLTS AT SEA LEVEL
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION1.50 KILOHERTZ BLANK AND 14.00 KILOHERTZ BLANK AND 60.00 KILOHERTZ BLANK AND 340.50 KILOHERTZ BLANK
CQJXNOMINAL THREAD SIZE0.112 INCHES
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION14.00 KILOHERTZ BLANK AND 60.00 KILOHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS30.0 MINIMUM BLANK AND 1.0 MAXIMUM BLANK AND 1.0 MAXIMUM BLANK AND 40.0 MINIMUM BLANK
CRSTBODY SURFACE TREATMENTTIN
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE